02.10.14 | eric bock
Thursday, March 20, 2014 1:00 – 4:00 pm ET Click here to view the agenda. This webinar will cover the following topics: Recap of July 31, 2013, NGS-hosted RTN webinar highlights including select Q&A. Use of GPS supplemental radio signals in Radio Technical Commission for Maritime Services Special Committee-104 format (RTCM), including discussion of degradation due …
02.10.14 | eric bock
Height Modernization Eastern States Regional Webinar Tuesday, March 4, 2014 1:00 – 5:00 pm ET Click here to view the agenda. This webinar will cover the following topics: Basic information about the National Geodetic Survey’s National Height Modernization Program, and supporting services such as the Online Positioning User Service (OPUS), and future plans for a new …
07.11.14 | eric bock
New Trimble Survey GNSS Firmware Version 4.90 Update This firmware version includes improvements to the survey receiver firmware. For best results users should upgrade to Trimble Access version 2014.12 or later. Supported GNSS receivers: if you have any Trimble R10, R10 LT, R8 models 4 & 3, R6 models 4 & 3, R4 models 3 …
10.1.14 | eric bock
New Trimble Survey GNSS Firmware Version 4.91 (Sept 2014 – Corrected) New Trimble Survey GNSS Firmware Version 4.91 Update This firmware version includes improvements to the survey receiver firmware. For best results users should upgrade to Trimble Access version 2014.10 or later. Supported GNSS receivers: if you have any Trimble R10, R10 LT, R8 models …
06.16.15 | eric bock
Trimble has made every effort to ensure our receivers will work seamlessly through the addition of one leap second on July 1, 2015. Our current firmware fully supports the introduction of a leap second on July 1, 2015.
03.5.14 | eric bock
Being “star” based, one of the many things GPS has reinforced is the fact that the physical Earth is a dynamic structure, continually changing shape and dimension over time. This means of course that any given measurements of the Earth must be considered not in three dimensions (XYZ) but in four (XYZ and Time). Since …
05.7.14 | Kelli Guidry
Trimble has released the dates for the 2014 Trimble Dimensions Conference, which will be held Novelber 3-5th, 2014, at the Mirage Hotels and Events Center in Las Vegas, NV. Trimble Dimensions is an educational and networking opportunity for professionals wishing to stay ahead of the curve on all different kinds of technologies and products under …
+ View Article
10.8.14 | Kelli Guidry
Trimble Now Offers Continuous RTK Level Accuracy with Enhancement to RTX-based Trimble xFill Technology BERLIN, Oct 7, 2014—Trimble (NASDAQ:TRMB) introduced today additions to its Global Navigation Satellite System (GNSS) portfolio—the Trimble® NetR9 Geospatial receiver; the Trimble Geo7X with Trimble Access™ field software onboard; and enhanced Trimble xFill™ functionality that provides continuous RTK level accuracy when …
+ View Article12.22.14 | eric bock
Requirements This firmware version includes improvements to the Survey Receiver firmware. It is considered a minor revision. This requires a valid firmware support agreement of: May 2014 or later for all support models NOTE: For best results, users should upgrade to Trimble Access 2014.20 or later when using Receiver Firmware version 4.93. Supported GNSS Receivers R10/R10 …
03.11.15 | eric bock
Trimble Survey GNSS Firmware Version 5.00 (March 2015) Requirements This firmware version includes improvements to the Survey Receiver firmware. This requires a valid firmware support agreement of: May 2014 or later for all support models NOTE: For best results, users should upgrade to Trimble Access 2014.20 or later when using Receiver Firmware version 5.00. …
04.24.15 | eric bock
This firmware version includes improvements to the Survey Receiver firmware.
NOTE: For best results, users should upgrade to Trimble Access 2014.20 or later when using Receiver Firmware version 5.01.
07.6.15 | eric bock
Trimble Survey GNSS Firmware Version 5.03 (June 2015)
09.3.14 | eric bock
TRIMBLE R10 – TRIMBLE XFILL FACT SHEET One of the most important features of the R10 is the xFill, in this article we will discuss how xFill works. With Firm Ware 4.80 and newer, xFill needs a “Warm up” period prior to use. Also make sure to check the view of the sky in the Sky …
