02.10.14 | eric bock
Thursday, March 20, 2014 1:00 – 4:00 pm ET Click here to view the agenda. This webinar will cover the following topics: Recap of July 31, 2013, NGS-hosted RTN webinar highlights including select Q&A. Use of GPS supplemental radio signals in Radio Technical Commission for Maritime Services Special Committee-104 format (RTCM), including discussion of degradation due …
03.23.15 | eric bock
C4GNet Introduces it’s Automatic Rover Fail-Over System!
09.4.15 | eric bock
Trimble has added new functionality to our GNSS receiver firmware for the current Trimble R10/R10LT and Trimble R8s. The latest firmware version (v5.03, released June 2015) and later, automatically checks if new radio firmware is required when loading receiver firmware. Note the affected receiver part number table below.
07.11.14 | eric bock
New Trimble Survey GNSS Firmware Version 4.90 Update This firmware version includes improvements to the survey receiver firmware. For best results users should upgrade to Trimble Access version 2014.12 or later. Supported GNSS receivers: if you have any Trimble R10, R10 LT, R8 models 4 & 3, R6 models 4 & 3, R4 models 3 …
10.1.14 | eric bock
New Trimble Survey GNSS Firmware Version 4.91 (Sept 2014 – Corrected) New Trimble Survey GNSS Firmware Version 4.91 Update This firmware version includes improvements to the survey receiver firmware. For best results users should upgrade to Trimble Access version 2014.10 or later. Supported GNSS receivers: if you have any Trimble R10, R10 LT, R8 models …
06.16.15 | eric bock
Trimble has made every effort to ensure our receivers will work seamlessly through the addition of one leap second on July 1, 2015. Our current firmware fully supports the introduction of a leap second on July 1, 2015.
03.5.14 | eric bock
Being “star” based, one of the many things GPS has reinforced is the fact that the physical Earth is a dynamic structure, continually changing shape and dimension over time. This means of course that any given measurements of the Earth must be considered not in three dimensions (XYZ) but in four (XYZ and Time). Since …
04.24.15 | eric bock
This firmware version includes improvements to the Survey Receiver firmware.
NOTE: For best results, users should upgrade to Trimble Access 2014.20 or later when using Receiver Firmware version 5.01.
09.3.14 | eric bock
TRIMBLE R10 – TRIMBLE XFILL FACT SHEET One of the most important features of the R10 is the xFill, in this article we will discuss how xFill works. With Firm Ware 4.80 and newer, xFill needs a “Warm up” period prior to use. Also make sure to check the view of the sky in the Sky …
