Trimble Access software version 2015.22

Trimble Access software version 2015.22

General Survey version 2015.22



Resolved issues


SV count in NMEA output: An issue where a very large number of SVs was reported in NMEA data output to VRS networks or from the receiver when the Use job coordinates option was selected in the NMEA output options in the survey style is now resolved.

R2 antenna in survey style: An issue when using the Trimble R2 with a Trimble Slate or TSC3 lite controller, where the R2 antenna type was not available for selection in the survey style is now resolved.

Trimble Slate controller running slowly: An issue where Trimble Slate controllers ran very slowly or appeared to freeze when connecting to a GNSS receiver or starting a GNSS survey is now resolved. For this fix to be effective, you must reset the controller to the factory default settings and then install Trimble Access version 2015.22.


Software and Hardware Requirements


Trimble Access software version 2015.22 communicates best with the software and hardware products shown below. The software can also communicate with any version later than that shown.

Trimble software                       Version

Trimble Business Center (32-bit)               2.99

Trimble Business Center (64-bit)              3.60

Trimble receiver                        Version

Trimble R10                                                        5.10

Trimble R8s                                                         5.10

Trimble R2                                                           5.10

Trimble R8-4, R8-3                                           5.03

Trimble R6-4, R6-3                                           5.03

Trimble R4-3, R4-2                                           5.03

Trimble R7                                                           5.00

Trimble R5                                                           5.00

Trimble NetR9 Geospatial                           5.10

Trimble Geo7X                                                  4.95

Trimble GeoXR                                                  4.55

Trimble R8-2, R6-2, R4-1                                4.64

5800                                                                       4.64

5700 II                                                                   4.64

Trimble Instrument                    Version

Trimble V10 imaging rover                           E1.0.67

Trimble VX Spatial Station                            R12.5.44

Trimble S5/S7/S9 total station                    H1.0.18

Trimble S8 totalstation                                   R12.5.45

Trimble S6 totalstation                                   R12.5.45

Trimble S3 totalstation                                   M2.2.18

Trimble M3 totalstation                                 V2.0.4.4

For the latest software and firmware versions, see also

Controller operating system support


Trimble TSC3 controllers with Microsoft Windows Mobile Version 6.5 Professional can run Trimble Access software version 1.8.0 to version 2011.10. Trimble TSC3 controllers with Microsoft Windows Mobile Embedded Handheld 6.5 must have Trimble Access version 2012.00 or later.

For more information please please click on ReleaseNotes 2015-22

You can download Trimble Installation Manager by Clicking TIM

Leave a Reply