News

Categories

NEI - Your resource for all industry news

Latest GNSS firmware now has automatic radio FW upgrading

Trimble has added new functionality to our GNSS receiver firmware for the current Trimble R10/R10LT and Trimble R8s. The latest firmware version (v5.03, released June 2015) and later, automatically checks if new radio firmware is required when loading receiver firmware. Note the affected receiver part number table below.

New Trimble Survey GNSS Firmware Version 4.90 Update

New Trimble Survey GNSS Firmware Version 4.90 Update This firmware version includes improvements to the survey receiver firmware. For best results users should upgrade to Trimble Access version 2014.12 or later. Supported GNSS receivers: if you have any Trimble R10, R10 LT, R8 models 4 & 3, R6 models 4 & 3, R4 models 3

New Trimble Survey GNSS Firmware Version 4.91 (Sept 2014 – Corrected)

New Trimble Survey GNSS Firmware Version 4.91 (Sept 2014 – Corrected) New Trimble Survey GNSS Firmware Version 4.91 Update This firmware version includes improvements to the survey receiver firmware. For best results users should upgrade to Trimble Access version 2014.10 or later. Supported GNSS receivers: if you have any Trimble R10, R10 LT, R8 models

Robotic Total Station Photogrammetric Workflow Workshops, Montgomery & Mobile

Robotic Total Station Photogrammetric Workflow Workshops, Montgomery & Mobile Free Workshops, AL: December 3 & 4, 2014 View this email in your browser Robotic Total Station Photogrammetric Workflow Workshops, Montgomery & Mobile   Instructor: Greg Gay   Please join us for these free, half-day workshops: Wednesday – December 3, 2014 from 2PM to 5PM Juliette Hampton Memorial

Special note on July 1, 2015 leap second

Trimble has made every effort to ensure our receivers will work seamlessly through the addition of one leap second on July 1, 2015. Our current firmware fully supports the introduction of a leap second on July 1, 2015.

Survey/Construction RTK & Robotics and Office Software Seminar

Survey/Construction RTK & Robotics and Office Software Seminar Date:  May 19-21, 2015 | Start: 08:00 | End: 05:00 PDH CREDITS CAN BE EARNED BY ATTENDING! NEI along with Trimble Navigation will be hosting a 3 day seminar at our Lafayette, LA office.   You have the option to attend individual sessions or you can attend all 3

Trimble Dimensions 2014 – Save the date!

Trimble has released the dates for the 2014 Trimble Dimensions Conference, which will be held Novelber 3-5th, 2014, at the Mirage Hotels and Events Center in Las Vegas, NV. Trimble Dimensions is an educational and networking opportunity for professionals wishing to stay ahead of the curve on all different kinds of technologies and products under

+ View Article

Trimble Offers More Flexibility for Surveyors with Expanded GNSS Portfolio

Trimble Now Offers Continuous RTK Level Accuracy with  Enhancement to RTX-based Trimble xFill Technology BERLIN, Oct 7, 2014—Trimble (NASDAQ:TRMB) introduced today additions to its Global Navigation Satellite System (GNSS) portfolio—the Trimble® NetR9 Geospatial receiver; the Trimble Geo7X with Trimble Access™ field software onboard; and enhanced Trimble xFill™ functionality that provides continuous RTK level accuracy when

+ View Article

Trimble Power Line

Trimble Power Line The Trimble® Power Line application provides a streamlined workflow to measure and estimate the sag of a power line without shooting the cable. It provides a conventional survey workflow to record points on both power pole and line. The wizard-based workflow in the Power Line software helps you define key points on

Trimble Survey GNSS Firmware Version 4.93

Requirements This firmware version includes improvements to the Survey Receiver firmware. It is considered a minor revision. This requires a valid firmware support agreement of:  May 2014 or later for all support models NOTE: For best results, users should upgrade to Trimble Access 2014.20 or later when using Receiver Firmware version 4.93. Supported GNSS Receivers R10/R10

Trimble Survey GNSS Firmware Version 5.10

Trimble Survey GNSS Firmware Version 5.10 Requirements This firmware version includes improvements to the Survey Receiver firmware. NOTE: For best results, users should upgrade to Trimble Access 2015.20 or later when using Receiver Firmware version 5.10. Supported GNSS Receivers The following table identifies the Survey GNSS receivers supported by this revision. Integrated receivers: Trimble R10,

Trimble xFill

TRIMBLE R10 – TRIMBLE XFILL FACT SHEET One of the most important features of the R10 is the xFill, in this article we will discuss how xFill works. With Firm Ware 4.80 and newer, xFill needs a “Warm up” period prior to use. Also make sure to check the view of the sky in the Sky