C4Gnet.XYZ Real-Time Network Now Supports BeiDou!

USE GPS – GLONASS – GALILEO – BEIDOU TODAY

To get all 4 constellations in a network solution, you will need to use either the PPP_GNSS_CMRx_NAD83 (for Trimble only rovers) or PPP_GNSS_RTCM3_2_NAD83 (for all rovers).

You will also get all 4 constellations using a Nearest Single Base mountpoint.  These start with prefix NSB and are available in both CMRx and RTCM 3.2 formats. The CMRx Nearest Single Base mountpoint is NSB_CMRx_NAD83 and the RTCM 3.2 mountpoint is NSB_RTCM3_2_NAD83.

Remember that NSB will produce a part per million error for every kilometer away you get from the base that your connected to whereas this is never the case in a network solution.

Visit the C4Gnet.XYZ Portal

Leave a Reply